How to Flash Windows 10 for CHUWI HI10
Tips: The battery level should be over 50% before flashing the system

Prepared Tools: 8GB USB Flash Disk, USB-OTG Cable, HUB (over 3 interfaces) and the USB keyboard as follows:

CHUWI HI10 tablet

(2 USB flash disks)+ (a piece of OTG) + (HUB) + (1 keyboard)

Firmware for Serial number HI10- HI10 42151100001-1028  download link :https://www.dropbox.com/sh/ht9am2b9dfpp1dh/AAA7oApODn-yqVC8w0bPo89la?dl=0
Firmware for Serial number HI10- HI10 42151101029-3000  download link :https://www.dropbox.com/sh/ht9am2b9dfpp1dh/AAA7oApODn-yqVC8w0bPo89la?dl=0
Firmware for Serial number HI10 42151103001-45120XXXXX  download link :https://www.dropbox.com/sh/qrs5tmkhh2sth91/AADMbu3nYkM8pHiOTKetGYZra?dl=0

How to find the serial number of the tablet? It is at the back of the tablet as follows:

CHUWI HI10 tablet

The first step

The tablet is in off mode and its battery level must be guaranteed over 50%.

Format the first USB flash disk that is made the startup disk into the format of FaT32, rename it as “WINPE”

Please format the second USB flash disk into the format of NTFS, rename it as “WINPE”.

Unzip the image files downloaded.

Close the antivirus software before unzipping the image files to avoid the apps in files are deleted.
The second step

Copy the unzipped image files to the Root directory of the USB flash disk in the format of FAT32 as follows:

CHUWI HI10 tablet

Copy the seven pieces of files to the first U flash disk that is made startup disk..

CHUWI HI10 tablet

Copy the “images” file to the second USB flash disk in NTFS format

The third step

The tablet connects Hub. Put the USB flash disk into the Hub, and then plug the Hub in keyboard as the picture shows:

CHUWI HI10 tablet

The ports in the hub are in order. The first USB flash disk should be put into the port firstly.

Please press the power button of the tablet and simultaneously click “F7”of the keyboard continuously to enter the boot mode.

And then put the second USB flash disk in NTFS format into the HUB.

Choose the first row to flash the system automatically.

CHUWI HI10 tablet

Press “Enter” button to program. When the programming is finished, the tablet will shut off automatically as follows:

CHUWI HI10 tablet

The last step

The tablet will automatically shutdown when completed

The programming will last about 5 to 10 minutes; the precise time is dependent of Hub and U disk. The introduction is on basis of using the U disk 3.0. The programming lasts about 5 minutes